Adi_Ebiu_Sdram_Cddbg; Adi_Ebiu_Bank_Number - Analog Devices VisualDSP++ 5.0 Service Manual

Setting Control Values in the EBIU Module

ADI_EBIU_SDRAM_CDDBG

This enumeration enables or disables the SDRAM control signals when
the external memory interface is granted to an external controller. This
enumeration corresponds to the
ADI_EBIU_SDRAM_CDDBG_DISABLE
ADI_EBIU_SDRAM_CDDBG_ENABLE
The default value is specified by the following macro:
#define ADI_EBIU_SDRAM_CDDBG_DEFAULT
ADI_EBIU_SDRAM_CDDBG_DISABLE

ADI_EBIU_BANK_NUMBER

This enumeration is used to specify the bank number 0, 1, 2, or 3, for
which the associated command applies. It can also be used to specify all
banks.
ADI_EBIU_BANK_0
ADI_EBIU_BANK_1
ADI_EBIU_BANK_2
ADI_EBIU_BANK_3
ADI_EBIU_BANK_ALL
4-44
bit in the
CDDBG
Disables the SDRAM control signals when the
external memory interface is granted to an external
controller.
Enables the SDRAM control signals when the
external memory interface is granted to an external
controller.
Command is for bank 0.
Command is for bank 1.
Command is for bank 2.
Command is for bank 3.
Command is for ALL four banks.
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
register.
EBIU_SDGCTL