Adi_Dma_Tc_Parameter; Adi_Dma_Config_Reg Field Values; Adi_Dma_Dma2D; Adi_Dma_Di_En - Analog Devices VisualDSP++ 5.0 Service Manual

ADI_DMA_TC_PARAMETER

The
ADI_DMA_TC_PARAMETER
parameters that can be used in the
ADI_DMA_TC_SET
ADI_DMA_CMD_GET_TC
manager. Possible values are:
ADI_DMA_TC_DCB
ADI_DMA_TC_DEB
ADI_DMA_TC_DAB
ADI_DMA_TC_MDMA

ADI_DMA_CONFIG_REG Field Values

These values are to be used to set the relevant bits in the DMA
configuration word.

ADI_DMA_DMA2D

ADI_DMA_LINEAR
ADI_DMA_2D

ADI_DMA_DI_EN

ADI_DMA_DI_EN_DISABLE
ADI_DMA_DI_EN_ENABLE

ADI_DMA_DI_SEL

ADI_DMA_DI_SEL_OUTER_LOOP
ADI_DMA_DI_SEL_INNER_LOOP
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
enumeration defines the DMA traffic control
or
ADI_DMA_TC_GET
and
ADI_DMA_CMD_SET_TC
DMA core bus
DMA access bus
DMA external bus
MDMA round robin
Linear buffer
2-D DMA operation
Disables callbacks on completion.
Enables callbacks on completion.
Callback after completing whole buffer (default)
Callback after completing each inner loop
field of an
ParameterID
data structure when passing the
commands to the DMA
DMA Manager
6-61