Real-Time Clock Service; Device Manager - Analog Devices VisualDSP++ 5.0 Service Manual

When the FSS is used in the VDK environment, this value is actually
ignored by the semaphore service; however, you need to assign the appro-
priate number to the maximum active semaphores value in the kernel tab
of your application project.

Real-Time Clock Service

The dependency on the real-time clock (RTC) service applies only if a file
system driver, included in an application, makes use of the RTC to supply
time and date details to be entered in the directory entries of new and
modified files. This is the case with the FAT file system driver supplied
with VisualDSP++5.0.
Initialization of the real-time clock service and how to set the current date
and time are detailed in

Device Manager

Each PID and FSD registered by the application represents at least one
device driver in the application; some PIDs such as the USB mass storage
class driver may require two or more. Additionally, multiple instances of
an FSD represent separate device drivers.
The value given to the
the number of PID and FSD instances appropriate for the required FSS
configuration. For more details, see the appropriate device driver docu-
mentation in the folders,
Blackfin\Docs\drivers\pid
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
Chapter 11, Real-Time Clock
ADI_SSL_DEV_NUM_DEVICES
Blackfin\Docs\drivers\fsd
.
File System Service
Service.
must be incremented by
and
12-11