Adi_Flag_Event - Analog Devices VisualDSP++ 5.0 Service Manual

Public Data Types, Enumerations, and Macros
ADI_FLAG_RESULT_NOT_CAPABLE
ADI_FLAG_RESULT_TRIGGER_TYPE_NOT_SUPPORTED
ADI_FLAG_RESULT_CANT_MAP_FLAG_TO_INTERRUPT
ADI_FLAG_RESULT_NOT_MAPPED_TO_INTERRUPT
ADI_FLAG_RESULT_CALLBACK_NOT_INSTALLED
ADI_FLAG_RESULT_BAD_CALLBACK_MEMORY_SIZE

ADI_FLAG_EVENT

The
ADI_FLAG_EVENT
occurred. There is only one value,
meration type is different from all other event types for system services—a
single callback function can be used for any service, regardless of the event
it processes. Event codes for the flag service begin with the value
ADI_FLAG_ENUMERATION_START
Event code
ADI_FLAG_EVENT_CALLBACK
7-34
enumeration defines the type of callback event that
ADI_FLAG_EVENT_CALLBACK.
, for easy identification.
Description
The trigger condition for the specified flag
occurred.
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
(0x80006) given flag not capable of
function requested
(0x80007) trigger type is not sup-
ported
(0x80008) cannot map flag to given
interrupt peripheral ID
(0x80009) flag not mapped to inter-
rupt
(0x8000a) no callback is installed for
given flag
(0x8000b)
ADI_FLAG_CALLBACK_MEMORY
is invalid (internal error)
macro
This enu-