Core Timer Functions; Adi_Tmr_Corecontrol; Watchdog Timer Functions; Adi_Tmr_Watchdogcontrol - Analog Devices VisualDSP++ 5.0 Service Manual

Operation
necessary action to simultaneously enable or disable the timers. If the
underlying hardware does not allow the specified timers to be controlled
simultaneously, the function uses best efforts to enable or disable the tim-
ers as quickly as possible. Refer also to
page 8-24.

Core Timer Functions

The functions described in this section are used for the core timer only.

adi_tmr_CoreControl

The
adi_tmr_CoreControl()
Analogous to the general-purpose timer control function, this function is
passed a command ID specifying the parameter of the function that is
being addressed, and a command-specific parameter. The list of command
IDs applicable to the core timer and the corresponding command-specific
parameters are described in
Refer also to "adi_tmr_CoreControl" on page

Watchdog Timer Functions

The functions described in this section are used for the watchdog timer
only.

adi_tmr_WatchdogControl

The
adi_tmr_WatchdogControl()
Analogous to the general-purpose timer and core timer control functions,
this function is passed a command ID specifying the parameter of the
function being addressed, and a command-specific parameter. Refer also
to "adi_tmr_WatchdogControl" on page
8-6
"adi_tmr_GPGroupEnable" on
function is used to configure the core timer.
"ADI_TMR_CORE_CMD" on page
function configures the watchdog timer.
8-22.
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
8-21.
8-33.