Analog Devices VisualDSP++ 5.0 Service Manual page 141

PC-133 compliance. For some processors, currently including the
ADSP-BF537 family and the ADSP-BF527 family, this restriction
can be circumvented by enabling the
ister (see
also be achieved by inserting the following command-value pair to
the table that is passed to the
{ ADI_PWR_CMD_SET_PC133_COMPLIANCE, 0 }
Prototype
ADI_PWR_RESULT adi_pwr_SetPowerMode(
const ADI_PWR_MODE mode);
Arguments
mode
Return Value
In the debug variant of the library, the function
returns one of the following result codes; otherwise, the function returns
ADI_PWR_RESULT_SUCCESS
ADI_PWR_RESULT_SUCCESS
ADI_PWR_RESULT_NOT_INITIALIZED
ADI_PWR_RESULT_INVALID_MODE
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
"adi_pwr_SetVoltageRegulator" on page
ADI_PWR_MODE
transitioned to. See
.
Process completed successfully.
PM module has not been initialized.
Either an incorrect mode has been requested or the
requested mode cannot be reached from the current
mode.
Power Management Module
bit in the
CKELOW
function:
adi_pwr_Init
value indicates the state the processor is
"ADI_PWR_MODE" on page
adi_pwr_SetPowerMode
reg-
VR_CTL
3-38). This can
3-49.
3-37