Analog Devices VisualDSP++ 5.0 Service Manual page 123

);
Refer to "ADI_PWR_COMMAND" on page 3-42
Types and Enumerations" on page 3-42
mands and associated values.
Prototype
ADI_PWR_RESULT adi_pwr_Control(
ADI_PWR_COMMAND command,
void *Value
);
Arguments
Command
Value
Return Value
In debug mode, the
ing values; otherwise,
ADI_PWR_RESULT_SUCCESS
ADI_PWR_RESULT_BAD_COMMAND
ADI_PWR_RESULT_NOT_INITIALIZED
ADI_PWR_RESULT_INVALID_INPUT_DELAY
ADI_PWR_RESULT_INVALID_OUTPUT_DELAY
ADI_PWR_RESULT_INVALID_LOCKCNT
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
(void*)table
ADI_PWR_COMMAND
of the associated value argument.
This is the required value.
See "ADI_PWR_COMMAND" on page
adi_pwr_Control
ADI_PWR_RESULT_SUCCESS
Power Management Module
and "Public Data
for the complete list of com-
enumeration value specifies the meaning
function returns one of the follow-
is returned.
Function completed successfully.
Invalid command has been specified.
PM module has not been initialized.
Input delay value is invalid.
Output delay value is invalid.
PLL lock count value is invalid.
3-42.
3-19