Adi_Flag_Close - Analog Devices VisualDSP++ 5.0 Service Manual

adi_flag_Close

Description
The
adi_flag_Close
needed by the application. At present, this function does nothing but
returns immediately to the caller. Future Blackfin devices may require this
function manipulate the hardware in some way when closing a flag.
Prototype
void adi_flag_Close(
ADI_FLAG_ID
);
Arguments
FlagID
Return Value
ADI_FLAG_RESULT_SUCCESS
Any other value
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
function is called when a particular flag is no longer
FlagID
Enumerator value that uniquely identifies the flag to
close
Function completed successfully.
Error has occurred.
See "ADI_FLAG_RESULT" on page 7-33
return codes.
Programmable Flag Service
for a list of
7-17