Rtc Service Api Functions - Analog Devices VisualDSP++ 5.0 Service Manual

RTC Service API Functions

This section describes the RTC functions that are available to the applica-
tion. These functions read and write to the hardware registers so the
application does not have to study the details of each register. Below is a
list of the functions in the RTC API.
• "adi_rtc_Init()" on page 11-18
• "adi_rtc_Terminate()" on page 11-19
• "adi_rtc_SetDateTime()" on page 11-20
• "adi_ rtc_GetDateTime()" on page 11-21
• "adi_rtc_InstallCallback()" on page 11-22
• "adi_rtc_RemoveCallback()" on page 11-24
• "adi_rtc_EnableWakeup()" on page 11-25
• "adi_rtc_DisableWakeup()" on page 11-26
• "adi_rtc_ResetStopwatch()" on page 11-27
Each API function returns a value of type
the success or failure of the function call. The result codes are defined in
Table 11-4 on page
types in the API.
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
11-30. This table describes the structures and data
Real-Time Clock Service
which indicates
ADI_RTC_RESULT
11-17