Analog Devices VisualDSP++ 5.0 Service Manual page 378

Public Data Types, Enumerations, and Macros
Table 8-3. Commands Executed for General-Purpose Timers (Cont'd)
Command ID
ADI_TMR_GP_CMD_IS_ERROR
ADI_TMR_GP_CMD_CLEAR_ERROR
ADI_TMR_GP_CMD_IS_SLAVE_ENABLED
ADI_TMR_GP_CMD_IMMEDIATE_HALT
ADI_TMR_GP_CMD_ENABLE_TIMER
ADI_TMR_GP_CMD_SET_ENABLE_DELAY
8-38
Value
u32 *
– error
TRUE
– no error
FALSE
Ignored
u32 *
– enabled
TRUE
– disabled
FALSE
Ignored
– enabled
TRUE
– disabled
FALSE
u32
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
Description
Stores the error status
in the specified loca-
tion.
Clears the error status
of the timer.
Stores the slave enable
status in the specified
location.
Immediately stops
timer in PWM mode.
Enables or disables the
timer.
Number of SCLK
cycles to delay between
the enabling of each
timer