Rebuilding The Device Driver Library - Analog Devices VisualDSP++ 5.0 Service Manual

application developer who wants a version of the device driver library that
will run on any revision of ADSP-BF532 silicon should link with the
libdrv532y.dlb
It is strongly recommended that you use the debug versions of the
device driver library during development, because built-in,
error-checking code within the library can save countless hours of
development time.
Specify the use of debug versions of the libraries by selecting Use Debug
System libraries on the Link:Processor page of the Project Options dialog
box.

Rebuilding the Device Driver Library

Under normal situations, there is no need to rebuild the device driver
library. However, to accommodate unforeseen circumstances and provide
the ability to tailor the implementation to a user's particular needs, all
source code and include files necessary to rebuild the device driver library
are provided. In addition, VisualDSP++ project files are included for
application developers who use the VisualDSP++ development toolset.
All code for the device driver library is located in the following directories:
•
Blackfin/lib
versions of the device driver library files (
•
Blackfin/lib/src/drivers
code files and non-API include files for the device manager and
Analog Devices-provided physical drivers. Also in this directory are
VisualDSP++ project files that can be used to rebuild the libraries.
•
Blackfin/include/drivers
manager API include file and the include files for all Analog
Devices-provided physical drivers.
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
file from the
Blackfin/lib
– This directory contains the Analog Devices-built
directory.
*.dlb
– This directory contains all the source
– This directory contains the device
Introduction
).
1-29