Interoperability With An Rtos; Adi_Dcb_Forward - Analog Devices VisualDSP++ 5.0 Service Manual

Interoperability With an RTOS

Interoperability With an RTOS
The DCB manager employs two functions,

adi_dcb_Forward

including standalone mode.
These functions are supplied in a separate source file,
for each implementation where
(for example,
threadx
Green Hill Software's INTEGRITY), or
VDK support is achieved with the functions (described above) supplied
directly by VDK. As a result, there is no equivalent
The relevant
adi_dcb_xxxx.c
source file via conditional compilation governed by a macro,
adi_dcb.c
, where
ADI_SSL_XXXX
Currently, implementations of the DCB manager are provided only for
the environments previously described. To implement these functions
under an alternative RTOS (for example, Linux), developers must provide
replacement definitions in equivalent files.
These functions are described in this section in more detail.
5-8
, to interface with the different RTOS environments,
xxxx
for Express Logic's ThreadX, and
file is incorporated (or not) into the main
is
XXXX STANDALONE
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
adi_dcb_RegisterISR
adi_dcb_xxxx.c
describes the required RTOS
for standalone use.
standalone
adi_dcb_vdk.c
, ,
THREADX INTEGRITY
and
,
for
integrity
file.
, or .
VDK