Sdram Initialization Prior To Loading An Executable - Analog Devices VisualDSP++ 5.0 Service Manual

SDRAM Initialization Prior to Loading an Executable

VisualDSP++ installation. The values required for the SDRAM configura-
tion registers can be set to the ones used in the relevant
processor, for example
directory of the VisualDSP++ installation.
Def
When a different memory configuration is required (other than the one
supplied with the EZ-KIT Lite evaluation systems), the user is required to
work out the appropriate values. When loading a program from the
IDDE, either use the Custom Board Support feature, now available with
VisualDSP++5.0 (described in
Board Support
file after backing up the original file.
.xml
3-14
ADSP-BF533-proc.xml
Help\Graphical Environment\Custom
), or simply change the values at the bottom of the relevant
VisualDSP++ 5.0 Device Drivers and System
, located in the
Services Manual for Blackfin Processors
file for the
.xml
System\Arch-