Adi_Pwr_Vr_Canwe; Adi_Pwr_Vr_Usbwe; Adi_Pwr_Vr_Ckelow - Analog Devices VisualDSP++ 5.0 Service Manual

Public Data Types and Enumerations

ADI_PWR_VR_CANWE

This data type defines the valid values for the
regulator control register. If enabled, the voltage regulator can be awak-
ened from power-down by activity on the controller area network (CAN)
interface.
ADI_PWR_VR_CANWE_DISABLED
ADI_PWR_VR_CANWE_ENABLED

ADI_PWR_VR_USBWE

This data type defines the valid values for the
regulator control register. If enabled, the voltage regulator can be awak-
ened from power-down by activity on the universal serial bus (USB)
interface.
ADI_PWR_VR_USBWE_DISABLED
ADI_PWR_VR_USBWE_ENABLED

ADI_PWR_VR_CKELOW

This data type defines the valid values for the
regulator control register. If enabled, the
reset to enable the SDRAM to remain in self-refresh mode.
ADI_PWR_VR_PHYWE_DISABLED
ADI_PWR_VR_PHYWE_ENABLED
3-54
CANWE
Disable wakeup by CAN activity.
Enable wakeup by CAN activity.
USBWE
Disable wakeup by USB activity.
Enable wakeup by USB activity.
CKELOW
pin is driven low on system
SCKE
Drive high on reset; SDRAM contents are
SCKE
invalidated.
Drive low on reset; SDRAM contents are
SCKE
maintained.
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
bit in the voltage
bit in the voltage
bit in the voltage