Analog Devices VisualDSP++ 5.0 Service Manual page 469

Table 10-5. Result Codes (Cont'd)
Name
ADI_DEV_RESULT_INVALID_REG_ADDRESS
ADI_DEV_RESULT_INVALID_REG_FIELD
ADI_DEV_RESULT_INVALID_REG_FIELD_DATA
ADI_DEV_RESULT_ATTEMPT_TO_WRITE_READONLY_REG
ADI_DEV_RESULT_ATTEMPT_TO_ACCESS_RESERVE_AREA
ADI_DEV_RESULT_ACCESS_TYPE_NOT_SUPPORTED
ADI_DEV_RESULT_DATAFLOW_NOT_ENABLED
ADI_DEV_RESULT_BAD_DIRECTION_FIELD
ADI_DEV_RESULT_BAD_IVG
ADI_DEV_RESULT_SWITCH_BUFFER_PAIR_INVALID
ADI_DEV_RESULT_DMA_CHANNEL_UNAVAILABLE
ADI_DEV_RESULT_ATTEMPTED_BUFFER_TABLE_NESTING
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
Device Driver Manager
Description
Accessing invalid device register
address
Accessing invalid device register field
location
Providing invalid device register field
value
Attempt to write a read-only register
Attempt to access a reserved location
Access type provided by the driver is
not supported
Sync mode- enable dataflow before
providing buffers
Sequential I/O mode- buffers pro-
vided with invalid direction
Bad IVG number detected
Invalid buffer pair provided with
switch/update switch buffer type
No DMA channel available to process
command/buffer
Buffer table nesting is not allowed
10-71