Analog Devices VisualDSP++ 5.0 Service Manual page 190

Public Data Types and Enumerations
Table 4-2. EBIU Module Function Result Codes (Cont'd)
Result Code
ADI_EBIU_RESULT_INVALID_IVG
ADI_EBIU_RESULT_INVALID_SDRAM_BANK
ADI_EBIU_RESULT_INVALID_SDRAM_SCK1E
ADI_EBIU_RESULT_INVALID_DDR_MODULE
ADI_EBIU_RESULT_INVALID_DDR_REFI
ADI_EBIU_RESULT_INVALID_DDR_RFC
ADI_EBIU_RESULT_INVALID_DDR_RP
ADI_EBIU_RESULT_INVALID_DDR_RAS
ADI_EBIU_RESULT_INVALID_DDR_RC
ADI_EBIU_RESULT_INVALID_DDR_WTR
ADI_EBIU_RESULT_INVALID_DDR_DEVICE_SIZE
ADI_EBIU_RESULT_INVALID_DDR_DEVICE_WIDTH
ADI_EBIU_RESULT_INVALID_DDR_EXTERNAL_BANKS
ADI_EBIU_RESULT_INVALID_DDR_DATA_WIDTH
ADI_EBIU_RESULT_INVALID_DDR_WR
ADI_EBIU_RESULT_INVALID_DDR_MRD
ADI_EBIU_RESULT_INVALID_DDR_RCD
ADI_EBIU_RESULT_INVALID_DDR_CAS
ADI_EBIU_RESULT_INVALID_DDR_PASR
ADI_EBIU_RESULT_INVALID_DDR_SOFT_RESET
4-26 VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
Explanation
Invalid IVG level supplemental
interrupt (for dual-core
processors only
Invalid bank number given
Invalid value
SCK1E
Invalid SDRAM (DDR)
module type
Invalid refresh interval
Invalid auto-refresh command
Invalid precharge to active inter-
val
Invalid active to precharge inter-
val
Invalid active to active interval
Invalid write to read interval
Invalid device size
Invalid device width
Invalid number of external
banks
Invalid data width
Invalid write recovery time
Invalid mode register selection
Invalid active to R/W interval
Invalid R/W to valid data
interval
Invalid partial array self-refresh
request
Invalid soft reset request