Analog Devices VisualDSP++ 5.0 Service Manual page 331

Arguments
FlagID
PeripheralID
Trigger
WakeupFlag
ClientHandle
DCBHandle
ClientCallback
Return Value
ADI_FLAG_RESULT_SUCCESS
Any other value
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
Programmable Flag Service
Enumerator value that uniquely identifies which flag the call-
back is assigned
Peripheral ID that specifies the system interrupt for the flag
to use (see interrupt manager and adi_int.h.)
Trigger condition that generates the callback
Flag indicating if the processor has woken up from a low
power state if the trigger occurs
Identifier defined and supplied by the client. This value is
passed to the callback function.
Either NULL if using live callbacks or the handle to the
deferred callback service that is used for callbacks
Address of the client's callback function
Flag service was successfully initialized.
Error has occurred.
See "ADI_FLAG_RESULT" on page 7-33
codes.
for a list of return
7-27