Analog Devices VisualDSP++ 5.0 Service Manual page 185

ADI_EBIU_RESULT_INVALID_DDR_MOBILE_DDR_ENABLE
ADI_EBIU_RESULT_ALREADY_INITIALIZED
In debug mode, the returned values from calling
ize the asynchronous memory controller are:
ADI_EBIU_RESULT_SUCCESS
ADI_EBIU_RESULT_FAILED
ADI_EBIU_RESULT_INVALID_ASYNCH_CLKOUT_ENABLE
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_ENABLE
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_NUMBER
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_16_BIT_
PACKING_ENABLE
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_TRANSITION_
TIME
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_READ_ACCESS_
TIME
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_WRITE_ACCESS
_TIME
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_SETUP_TIME
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_HOLD_TIME
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_ARDY_ENABLE
ADI_EBIU_RESULT_INVALID_ASYNCH_BANK_ARDY_
POLARITY
ADI_EBIU_RESULT_ALREADY_INITIALIZED
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
External Bus Interface Unit Module
Invalid mobile DDR enable
request
EBIU service already initialized
adi_ebiu_Init
Generic success
Generic failure
Invalid selection for
enable
Invalid selection for bank
enable
Invalid bank number specified
in command argument
For ADSP-BF561 only. Invalid
specification for 16-bit packing
enable
Invalid transition time
Invalid read access time
Invalid write access time
Invalid setup time
Invalid hold time
Invalid selection for
enable
Invalid selection for
polarity
EBIU service already initialized
to initial-
CLKOUT
ARDY
ARDY
4-21