Adi_Tmr_Corecontrol - Analog Devices VisualDSP++ 5.0 Service Manual

adi_tmr_CoreControl

Description
The
adi_tmr_CoreControl
If the flag is a logical 1 (driving high), this function makes the flag a logi-
cal 0 (driving low). If the flag is a logical 0 (driving low), this function
makes the flag a logical 1 (driving high).
Prototype
void adi_tmr_CoreControl (
ADI_TMR_CORE_CMD
void
);
Arguments
Command
Value
Return Value
ADI_TMR_RESULT_SUCCESS
Any other value
VisualDSP++ 5.0 Device Drivers and System
Services Manual for Blackfin Processors
function inverts the current value of the flag.
Command,
*Value
Identifier specifying the timer parameter that is
addressed. See
page 8-33 for a list of all core timer command
identifiers.
A command-specific value that is typically the
value of the parameter being set or a location into
which a value read from the timer is stored
Function completed successfully.
Error has occurred.
See "ADI_TMR_RESULT" on page 8-32
of return codes.
Timer Service
"ADI_TMR_CORE_CMD" on
for a list
8-21