One Minute Periodic Event; Hourly Periodic Event; Daily Periodic Event - Analog Devices VisualDSP++ 5.0 Service Manual

Operation

One Minute Periodic Event

The application may enable a periodic interrupt to occur when the min-
utes counter of the
becomes enabled when the application calls the
adi_rtc_InstallCallback()
ADI_RTC_EVENT_MINUTES
continue to occur every minute, until the application disables the event by
passing the argument
adi_rtc_RemoveCallback()

Hourly Periodic Event

The application may enable a periodic interrupt to occur when the hours
counter of the
becomes enabled when the application calls the
adi_rtc_InstallCallback()
ADI_RTC_EVENT_HOURS
continue to occur every hour until the application disables the event by
passing the argument
adi_rtc_RemoveCallback()

Daily Periodic Event

The application may enable a periodic interrupt to occur at midnight
when the days counter of the
event becomes enabled when the application calls the
adi_rtc_InstallCallback()
ADI_RTC_EVENT_DAYS
continue to occur each day until the application disables the event by pass-
ing the argument
function.
11-6
register advances. This interrupting event
RTC_STAT
function, passing the argument
. This event stays enabled and periodic interrupts
ADI_RTC_EVENT_MINUTES
function.
register advances. This interrupting event
RTC_STAT
function, passing the argument
. This event stays enabled and periodic interrupts
ADI_RTC_EVENT_HOURS
function.
RTC_STAT
function, passing the argument
. This event stays enabled and periodic interrupts
ADI_RTC_EVENT_DAYS
VisualDSP++ 5.0 Device Drivers and System
to the
to the
register advances. This interrupting
to the
adi_rtc_RemoveCallback()
Services Manual for Blackfin Processors