Programmable One-Touch Keys - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
SB
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch key
data for each multiline terminal.
For each UNIVERGE SV8100 Wireless telephone to use the Transfer When Out of
Range feature, enter the destination number (up to 24 digits) and name (up to 12
characters) into One-Touch bin 10. Make sure to add any required trunk access codes
for outside numbers. If this bin information is changed either through 15-14-01 or
through user programming, the destination for the transferred calls is also changed.
Input Data
Item No.
Feature Cross Reference

2 - 218
Program 15 : Extension, Basic Setup

15-14 : Programmable One-Touch Keys

Extension Number
Key Number
Dial Data
01 1~0, , # , Pause, Hookflash,

@ (Code for Answer-Wait)
Up to 24 digits
02 Name
Conditions
None
One-Touch Keys
UNIVERGE SV8100
Maximum eight digits
01~10
Name
Up to 24 Digits
Up to 12 Digits
Program 15 : Extension, Basic Setup
Default
No Setting
No Setting