For Your Convenience; Programmable Function Keys - NEC SL1100 User Manual

For Your Convenience

 Programmable Function Keys
Programmable Function Keys can be assigned as "Trunk" Key and/or other Function Keys. You can just
press the function key to activate the assigned function without dialing the Service Code.
Speaker
8
8
 There are 2 levels of Function Keys. (General Keys : assigned by 851, Appearance Keys : assigned by
852)
 Appearance Keys have priority. You can overwrite the Appearance Key at the General Key.
 If you want to overwrite the General Key at the Appearance Key, you have to erase the Appearance Key by
dialing "852 + 000" before General Key assignment.
 In the default setting, Programmable Function Key No. 1 to 12 is assigned as "Trunk" Key. If you want to
assign Function Keys (General) at the unused Trunk Keys, these unused keys should be erased by "852 +
000" operation.
 Programmable Function Keys can be erased by dialing "852 + 000" or "851 + 00".
 Programmable Function Keys can be assigned by Soft Key operation as well.
 DSS / One-Touch Keys
Programmable Function Keys can be assigned as DSS (Direct Station Selection) or One-Touch Keys. You
can place an Outside / Intercom Call by just pressing this key without dialing the number.
Speaker
8
Trunk Access Code
9
 To change the Trunk Access Code, Ask your NEC Authorized Supplier for the details.
 In the default setting, Programmable Function Key No. 1 to 12 is assigned as "Trunk" Key. If you want to
assign DSS Keys at the unused Trunk Keys, these unused keys should be erased by "852 + 000" operation
before the above operation.
 In case of DSS Key, the extension status can be indicated on the BLF. (idle : extinguished, Busy : lit)
 When you register a telephone number, the Trunk Access Code should be added in front of the number.
 Up to 36 digits dialing can be registered, but the name can not be registered.
 If you want to continue the operation, press Programmable Function Key instead of Speaker Key to finish.
 One-Touch Keys can be assigned by Soft Key operation as well.
Function Key
5 1
5 2
Function Key
5 1
Telephone Number
0 ?
Extension Number
? ?
Function Code & Add Data
? ?
0 1
? ?
?
3
Speaker
?
Hold Speaker