Debug Platform Udld - Cisco WLC 5700 Series Command Reference Manual

debug platform udld

debug platform udld

To enable debugging of the platform-dependent UniDirectional Link Detection (UDLD) software, use the
debug platform udld command in privileged EXEC mode. To disable debugging, use the no form of this
command.
Syntax Description
error
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
The undebug platform udld command is the same as the no debug platform udld command.
Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
26
(Optional) Displays error condition debug messages.
Layer 2/3 Commands
Modification
This command was introduced.
OL-32323-01