Mls Qos Srr-Queue Input Dscp-Map - Cisco Catalyst 3560-X Command Reference Manual

mls qos srr-queue input dscp-map

mls qos srr-queue input dscp-map
Syntax Description
Defaults
Command Modes
Command History
Catalyst 3750-X and 3560-X Switch Command Reference
2-388
Downloaded from www.Manualslib.com
Use the mls qos srr-queue input dscp-map global configuration command on the switch stack or on a
standalone switch to map Differentiated Services Code Point (DSCP) values to an ingress queue or to
map DSCP values to a queue and to a threshold ID. Use the no form of this command to return to the
default setting.
mls qos srr-queue input dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id
dscp1...dscp8}
no mls qos srr-queue input dscp-map
queue queue-id Specify a queue number.
For queue-id, the range is 1 to 2.
dscp1...dscp8 Map DSCP values to an ingress queue.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
threshold threshold-id Map DSCP values to a queue threshold ID.
dscp1...dscp8
For threshold-id, the range is 1 to 3.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
Table 2-19 shows the default DSCP input queue threshold map:
Table 2-19 Default DSCP Input Queue Threshold Map
DSCP Value Queue ID–Threshold ID
0–39 1–1
40–47 2–1
48–63 1–1
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02