Shutting Down The Server - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Possibilities to get more information about the defective component
– Checking the ServerView System Monitor, available on Windows or Linux
based servers with ServerView agents installed.
For more information, see the "ServerView System Monitor" user
guide.
– Checking the System Event Log (SEL), see
iRMC S6 web interface" on page
– Checking the indicators on the components, see
indicators" on page
– Checking the onboard indicators on the system board using the Indicate
CSS button, see
Using the CSS button on the system board
If the system has been powered off, the onboard indicators guides you to the
defective component.
CAUTION
It is mandatory to disconnect all power cords from the system in order to
use the Indicate CSS functionality.
▶ Shut down and switch off the server.
▶ Disconnect all power cords from the system.
▶ Press the Indicate CSS button to highlight defective components. The
indicator next to the defective component lights up.
4.5

Shutting down the server

CAUTION
▶
For more information, see
This step is only required when upgrading or replacing non-hot-plug
components.
TX1320 M5
89.
354.
"Using the CSS button on the system board" on page
Upgrade and Maintenance Manual
Basic hardware procedures
"Viewing the SEL using the
"Connectors and
"Important information" on page
45.
29.
45