12.4.3 Replacing a LTO drive
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
12.4.3.1 Preliminary steps
Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or ODD before removing it from the server.
"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the power cord" on page 49
Ê
"Getting access to the component" on page 50
Ê
"Removing the fan holder" on page 63
Ê
"Removing the front panel cage" on page 313
Ê
12.4.3.2 Removing the defective LTO drive
Ê Remove the LTO drive, see section
12.4.3.3 Installing the new LTO drive
Ê Install the LTO drive, see section
12.4.3.4 Concluding steps
"Installing the front panel cage" on page 319
Ê
"Installing the fan holder" on page 64
Ê
"Reassembling" on page 55
Ê
"Connecting the power cord" on page 59
Ê
"Switching on the server" on page 60
Ê
"Resuming BitLocker functionality" on page 89
Ê
RX2520 M4
"Removing the LTO drive" on page
"Installing the LTO drive" on page
Upgrade and Maintenance Manual
Accessible drives
Hardware: 10 minutes
294.
290.
299