Removing Backup And Optical Disk Media - Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual

Disabling the boot watchdog in the BIOS
▶ Enter the BIOS.
▶ Select the Management menu.
▶ Set Boot Watchdog to Enabled.
▶ Set Action to Continue.
▶ Save your changes and exit the BIOS.
For more information on BIOS settings, see the corresponding BIOS
Setup Utility reference manual.
Disabling the boot watchdog using the iRMC S5 web interface
▶ Log in to the iRMC S5 web interface.
▶ Select the Settings menu.
▶ Open the Server Management page.
▶ In the Boot Watchdog group, check the Enable Boot Watchdog Support
option. The Enable Boot Watchdog Support option must be selected.
▶ Select Continue from the Watchdog Action list.
▶ Click Apply for the changes to take effect.
For more information on iRMC settings, see the iRMC user guides.
5.1.3

Removing backup and optical disk media

▶ Ask the system administrator to eject all remaining backup or optical media
from the backup drive or ODD before removing it from the server.
▶ If the backup media cannot be ejected by conventional means, and it is
mandatory that the cartridge be removed prior to returning the drive for
repair or disposing it, a manual tape extraction needs to be performed.
Please contact Fujitsu support, if "forcible" tape ejection is necessary.
Upgrade and Maintenance Manual
Basic software procedures
63