Accessible drives
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Bring the server to its horizontal position.
Ê Open the side / top cover as described in section
on page 67
(rack server) or
server).
Ê Pull out the ID card and open the front cover as described in section
"Removing the rack front cover" on page 69
front cover" on page 74
12.3.3 Removing an optical disk drive (ODD)
Figure 205: Disconnecting cables from the optical disk drive
352
"Extending the server out of the rack" on page
"Removing the side cover" on page 71
(tower server).
Upgrade and Maintenance Manual
66.
"Removing the top cover"
(rack server) or
"Removing the
65.
(tower
TX140 S1