10.3
Installing memory modules
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver (for cover 2)
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
Selecting the memory slot
▶ Choose the memory slot according to the configuration rules, see
information" on page
Removing the memory dummy module
▶ If applicable, remove a dummy module, see
module" on page
RX2540 M7
80.
332.
347.
Upgrade and Maintenance Manual
Hardware: 5 minutes
89.
50.
50.
55.
"Removing a memory dummy
Main memory
49.
"Basic
341