Sflow Max-Datagram-Size - Cisco nexus 3000 series Command Reference Manual

Chapter System Management Commands
S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

sflow max-datagram-size

To configure the maximum number of data bytes that can be sent in a single sample datagram, use the
sflow max-datagram-size command. To remove the maximum of data bytes, use the no form of this
command.
Syntax Description
datagram-size
Defaults
None
Command Modes Global configuration
Release
Command History
5.0(3)U4(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure sFlow maximum datagram size.
switch# configure terminal
switch(config)# sflow maximum-datagram-size 2000
switch(config)# copy running-config startup-config
[########################################] 100%
switch(config)#
Related Commands Command
feature sflow
show sflow
OL-29557-04
sflow max-datagram-size datagram-size
no sflow max-datagram-size datagram-size
Maximum datagram size. The range for the datagram-size is from 200 to
9000 bytes. The default value is 1400.
Modification
This command was introduced.
Description
Enables sFlow.
Displays sFlow information.
Cisco Nexus 3000 Series NX-OS System Management Command Reference
sflow max-datagram-size
-SM-185