Call Pickup - Panasonic KX-TDE100 Features Manual

1.4.1.3

Call Pickup

Description
An extension user can answer a call ringing at any other extension.
The following types are available:
Type
Directed
Group
Call Pickup Deny:
Preventing other extensions from picking up calls ringing at your extension is also possible.
Conditions
• Call Pickup applies to:
Intercom, trunk, and doorphone calls
• Internal Call Block
An extension that is restricted by COS from calling certain extensions (→ 1.1.2.2 Internal Call Block)
also cannot pick up any calls ringing at those extensions.
[Directed Call Pickup]
• A user can also pick up a call to a specified extension by pressing the corresponding DSS button. This
feature is only available when (1) the user's extension is allowed to use this feature through COS
programming, (2) DSS buttons for extensions or incoming call distribution (ICD) groups have this
feature enabled through system programming, and (3) the light pattern of DSS buttons for incoming
calls to extensions or ICD groups is set to "On or Flash" through system programming.
The light pattern of a DSS button for an incoming call to an extension or incoming call distribution group
can be programmed through system programming. Call Pickup is available only when the DSS button
is flashing red.
[Group Call Pickup]
• A specified number of call pickup groups can be created, each of which consist of extension user
groups. One extension user group can belong to several call pickup groups. (→ 2.2.2 Group)
[Example]
Call Pickup Group 1
Extension
User Group 1
Extn. 100 Extn. 101
A specified extension's call.
A call within a specified call pickup group.
Call Pickup Group 2
Extension Extension
User Group 2 User Group 3
Extn. 102 Extn. 103 Extn. 104 Extn. 105
Picking up Call Type
Call Pickup Group 3
Extension
User Group 4
Extn. 106 Extn. 107
1.4 Answering Features
Feature Guide 85