2-7-3] Class Of Service-Internal Call Block; 2-8-1] Ring Tone Patterns-Call From Co - Panasonic KX-TAW848 Programming Manual

2.8.13 [2-7-3] Class of Service—Internal Call Block
Internal Call Block determines the restrictions placed on making intercom calls. The extensions,
incoming call distribution groups, and doorphones belonging to a certain COS can be programmed
to not receive intercom calls from those belonging to a certain COS.
COS Number of the Extension Which Receive the Call from Other Extension
1–64
Specifies the combinations of COS levels for which intercom calls are blocked.
Default
All extensions: Non Block
Value Range
Block (blue), Non Block
Maintenance Console Location
2.8.13 [2-7-3] Class of Service—Internal Call Block
Programming Manual References
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—COS
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.11.1 [5-1] Doorphone—COS
Feature Manual References
1.9.12 Internal Call Block
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
Different ring tone patterns can be selected for incoming CO line calls depending on the trunk group
that the calls are received on. A maximum of 8 Ring Tone Pattern Tables can be programmed, and
any pattern table can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming CO line calls.
Default
Single
Value Range
Single, Double, Triple
Maintenance Console Location
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
2.8 [2] System
PC Programming Manual 169