Time Service-Week Table [2-5-1] - Panasonic KX-TDA50 Features Manual

Feature Guide References
1.15.8 External Sensor
4.8.8 Time Service—Week Table [2-5-1]
A specific time mode (day, night, lunch, or break) can be selected for operation depending on the time of
the day. The time mode can be switched either automatically or manually. Select the desired switching mode
from the Time Service Switching Mode list.
The number of a Time Table corresponds to the number of a tenant. Select the desired Time Table from the
Time Table No. list.
When in the Automatic Switching mode, time modes of the tenant are switched as programmed in the
corresponding Time Table. Manual switching is possible only from an authorized extension (determined by
COS).
Day / Lunch / Night
Time Tables containing day, lunch, and night start times can be programmed for each day of the week.
Day 1 Start—Setting
Enables the setting of the Day 1 start time.
Default
Enable
Value Range
Disable, Enable
Programming References
4.8.15 Class of Service—COS Settings [2-7-1]
4.9.3 Extension Group [3-2]
Feature Guide References
2.2.4 Time Service
Day 1 Start—Hour
Specifies the hour of the Day 1 start time.
Default
9
Value Range
0–23
Programming References
4.8.15 Class of Service—COS Settings [2-7-1]
4.9.3 Extension Group [3-2]
4.8 System [2]
Feature Guide 371