Flash Time
Specifies the length of a flash signal.
Default
608 ms
Value Range
None, 16 × n (n=1–255) ms
Feature Guide References
None
Disconnect Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line.
Default
1.5 s
Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Feature Guide References
None
4.7.10 LCO Port [1-4] Port Command
Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.9 LCO Port [1-4]
Feature Guide References
None
4.7 Configuration [1]
Feature Guide
291