Efa (External Feature Access) - Panasonic KX-NCP500 Feature Manual

5.1.1 EFA (External Feature Access)

5.1 E
5.1.1 EFA (External Feature Access)
Description
Normally, an extension user can only access features within the PBX. However, when performing External
Feature Access (EFA) the extension user performs features outside of the PBX, such as using the transfer
services of the telephone company or host PBX. When EFA is performed, the PBX sends a flash/recall signal
to the telephone company or the host PBX (® 8.1.5 Host PBX Access Code (Access Code to the Telephone
Company from a Host PBX)).
This feature is only available on CO line calls.
This feature is performed by pressing the EFA button or the FLASH/RECALL button that is set to EFA mode
(® 6.1.2 Flash/Recall/Terminate).
Conditions
•
Flash/Recall Time
The Flash/Recall time can be assigned for each CO line port.
•
EFA Button
A flexible button can be customized as the EFA button.
•
It is possible to perform this feature by entering the feature number while the current call is placed on
Consultation Hold (e.g., is going to be transferred to an extension of the host PBX).
(® 3.1.22 Consultation Hold)
PC Programming Manual References
3.30 [1-1] Slot—Port Property - LCO Port—
3.36 [1-1] Slot—Port Property - T1 Port—
4.9 [2-6-1] Numbering Plan—Main—Features—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 7—
6.5 [4-1-4] Wired Extension—Flexible Button—
6.10 [4-2-1] Portable Station—Extension Settings—Option 7—
6.13 [4-2-3] Portable Station—Flexible Button—
6.18 [4-3] DSS Console—
9.5 [7-5] Miscellaneous—
PT Programming Manual References
[417] LCOT Flash/Recall Time
Feature Manual References
6.1.3 Flexible Buttons
Operating Manual References
1.3.23 EFA (External Feature Access)
102 Feature Manual
Flash Time
Flash Time
External Feature Access
Type
Type
Type
TRS Check after EFA
Flash Mode during CO Conversation
Flash Mode during CO Conversation
Document Version 2013-05