To Check/Control Jobs In Progress (Job List Screen) - Konica Minolta 7022 Instruction Manual

To Check/Control Jobs in Progress (Job List Screen)

The Job List Screen allows you to perform the following functions.
• Confirm machine status
• Delete reserve job
1.
Touch JOB LIST on the Basic Screen.
The Job List Screen will be displayed.
Check the current status of the machine.
2.
Perform the desired setting on the screen.
See the next page for details of the screen.
To change the order of a reserve job:
Touch the lower/upper arrow key to highlight the desired reserve job, then touch
ADVANCE.
The highlighted reserve job is advanced by one in printing order unless the job
preceding it is already in progress.
To clear reserve job:
Touch the lower/upper arrow key to highlight the desired reserve job, then touch
DELETE. The Job Clear Confirmation Screen will be displayed.
Touch YES to clear the highlighted reserve job, or NO to cancel.
3.
Touch OK on the Job List Screen.
The Basic Screen will be restored.
Copying Using Memory (continued)
• Change order of reserve job
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-27