Tray Auto Select Setting - Konica Minolta 8050 Instruction Manual

[11] Tray Auto Select Setting

Select whether the tray size setting will be detected or not detected when ATS/APS
functions. If you select it to be detected, you may also select the priority of the
detection for each tray.
Key Operator Mode Screen 1
Procedure
1 Touch [11] Tray auto select setting to display the Tray Auto Select Setting
Screen.
2 On the left half of the screen, touch to highlight each tray key, then select OFF or
ON to specify whether the selected tray is to be automatically detected or not
when ATS/APS functions.
Tray keys specified as ATS/APS ON will appear on the right half of the screen.
3 Specify the priority of the trays. Touch to highlight the desired tray key, then
change its priority by using Up
4 Touch OK to complete the setting and restore the Key Operator Mode Screen, or
touch CANCEL to restore the previous setting.
Key Operator Mode Screen 2
Tray Auto Select Setting Screen
and Down arrow keys.
14-35