Loading The Original And Paper; Load The Original - Konica Minolta bizhub C450i Quick Manual

6

Loading the Original and Paper

6.1

Load the original

The original loading methods are classified into two
types: loading the original into the ADF (Automatic Doc-
ument Feeder), and directly loading the original onto the
Original Glass.
Select the appropriate one for your requirements.
6.1.1 Loading the original into the
ADF
This function is useful when you want to scan an original
containing multiple pages, or a sheet original of different
sizes.
- Place original pages so that the first one is at the
top.
- Load the original with the scanning side facing up.
- Slide the Lateral Guide to suit the original size.
6.1.2 Placing the original on the
Original Glass
This function is useful when you want to scan a small
original such as a book, magazine, or business card.
- Place the original with the scanning side facing
down.
- Align the original with the
the Original Glass.
bizhub C650i/C550i/C450i
mark at the left back of
6.2 Loading paper
No paper setting is required because frequently used pa-
per is loaded during general use.
This section describes how to use paper that is not usu-
ally loaded into a paper tray.
The methods for loading envelopes, postcards, label
sheets, and index paper are as follows.
6.2.1 Loading paper in Tray 1 to Tray
2
Up to 500 sheets of plain paper can be loaded into each
tray.
Applicable paper types
Plain paper, single-side-only paper, thin paper, postcard
(4 e 6 (A6 Card)), envelope, special paper, thick paper,
letterhead, colored paper, recycled paper
How to load paper
1
Pull out the tray.
NOTICE
Be careful not to touch the Film.
6
23