Checking Feature Selections And Proof Copying; C Hecking Feature Selections And Proof Copying - Konica Minolta 7022 Instruction Manual

Checking Feature Selections and Proof Copying

Use the Check mode to confirm copying selections before starting print operation.
In this mode, use Proof copy to produce a sample of the copied set before making
multiple copies. This is a convenient and cost effective way of viewing the results of the
following copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
>>>
Specifications for Check Mode and Proof Copy<<<
❒ Proof copy is available when using RADF or Platen store mode for multiple originals.
❒ Proof copy cannot be used for testing the Userset density.
❒ Proof copy is not compatible with Group or E-SORT + group output mode and
Reserve mode.
1.
Select the desired copy conditions and enter the desired print quantity.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
3.
Press [CHECK] on the control panel.
The Check Screen will be displayed.
Verify the settings made for the current job.
• If settings are OK, proceed to step 8.
• If a sample copy is needed, proceed to the next step.
3-36
Reminder!
HINT
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
• Booklet
• Image insert
• Dual Page
DATA
FAX
1 2 3
INTERRU
4 5 6
7 8 9
0
STAR
CLEAR QTY.