Paper Tray Size Operation - Xerox DOCUPRINT N17 Service Manual

5.2.1.29 Paper Tray Size Operation

This diagnostic shows the contact actuation (combination of closed contacts) of each Paper Size
Sensor.
Execute Paper Tray Size Operation:
1 Enter Diagnostics Mode 1. The LCD displays PRINT COUNTER OPERATION indicating the
printer is in Diagnostics Mode 1.
2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays the PAPER TRAY SIZE
OPERATION message.
3 Press the ENTER key. The LCD displays each paper tray and the associate paper size. For
example;
4 Use the ENTER (4) key to scroll through the various paper trays available; MBF, Tray 1, Tray 2,
Tray 3, Envelope, etc.
NOTE: If an option paper tray is not installed, the LCD will display "No cassette."
NOTE: Paper Type = Letter (8.5 x 11), Folio (8.5 x 13), Legal (8.5 x 14).
5 If you wish to exit this test and enter another test use the MENU UP (1) or MENU DOWN (5) key
to scroll to another test.
6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.
Xerox DocuPrint N17 Service Manual
3/99
www.printcopy.info
5-59
MBF TRAY
LETTER
General Procedures/Information