Table of Contents
Advertisement
Configuring KIRK Wireless Server 600v3
86
In the IP address field, type the new IP address.
5
The new IP address is now the default address when accessing the KWS600v3.
In the Network mask field, type a new network mask.
6
Contact your system administrator for more information.
In the Default gateway field, type the IP address of the default gateway.
7
Contact your system administrator for more information.
Click OK.
8
Click Reset (under Administration menu) to save your configuration.
9
7.5.3 Configuring Ethernet Link
Under the Configuration menu, click ETH0, and then click Link.
1
Figure 21 Adm. Page: Configuration/ETH0/Link page
From the Link list, select auto, and then click OK.
2
When selecting auto, the link speed will be determined by the network switch.
The KWS600v3 supports the following link speeds:
• 10Mb-hdx
• 10Mb-fdx
• 100Mb-hdx
• 100Mb-fdx
Click Reset (under Administration menu) to save your configuration.
3
14117800, Ed.2.6
Advertisement
Table of Contents
