Table of Contents
Advertisement
Configuring the SpectraLink 8000 SVP Server
The SVP Server will automatically lock for maintenance if the IP
address is changed. When this
occurs, the SVP Server
Maintenance Lock
must be reset upon exit. All active calls are terminated during a reset.
SVP-II Mode
Set to
when using a SpectraLink 8000 Telephony Gateway.
NetLink
Ethernet link
The SVP Server will auto-negotiate unless there is a need to specify a
link speed.
System Locked
This option is used to take the system down for maintenance. The
default entry is
(No). Set it at
(Yes) to prevent any new calls from
N
Y
starting. Return to
to restore normal operation.
N
Maintenance Lock
The system automatically sets this option to
(Yes) after certain
Y
maintenance activities that require reset, such as changing the IP
address.
prevents any new calls from starting. Note
Maintenance Lock
PN: 1725-36032-001_G.doc
25
Advertisement
Table of Contents
Need help?
Do you have a question about the SpectraLink 1725-36032-001 and is the answer not in the manual?
Questions and answers