Recording The Installation Information - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide
Caution:

Recording the Installation Information

6–6
Do not mount the base station on soft surfaced walls such as those covered
with canvas, metal or sponge-like materials.
Mount the base station on the wall using the anchors and screws
1
accompanying the product.
Note: When you place the base station on the screws, ensure that the
screws do not touch the printed circuit board.
Figure 6-4 Base Station Wall Mounting
Connect the RJ45 plug to the ethernet connector at the bottom of the base
2
station.
0 0
Figure 6-5 Base Station - Ethernet Connector
After completing the installation of the base stations, record the location of
each base station and add a descriptive text in the Administration Page of the
KWS6000 under Administration/Base stations.