Change the default margin shift
Introduction
The margin shift is the distance that the margin is moved to the right or to the
left of the page.
The default margin shift is .48 inches. To change the default value, enter a
value from + 1 inch (left direction) down to - 1 inch (right direction).
Before you begin
Enter the key operator system.
1
Illustration
[11] Define the default margin shift
[11] Define the default margin shift
Changing the default margin shift
Activate the 'Machine' section.
1
Open the 'Console defaults' card.
2
Adjust the margin shift with the arrow keys
3
Check
Exit the key operator system.
1
To check the selection, make a test copy job.
2
Check that the default margin shift is set for your needs.
Set the defaults
.
29