Empty The Staple Receptacle - Oce VarioPrint 2045-65 DC Configuration And Maintenance Manual

Empty the staple receptacle

Introduction
The Océ VarioPrint 2045-65 DC has a staple removal unit on the top left cover.
The removed staples are stored in a receptacle. You must empty a full staple
receptacle.
Illustration
[60] Empty the staple receptacle
[60] Empty the staple receptacle
Emptying the staple receptacle
Remove the receptacle from the holder. Take care that the staples do not fall
1
into the machine.
Empty the receptacle and replace the receptacle in the original position.
2
94 Océ VarioPrint 2045-65 DC Configuration and maintenance manual