Prepare The Copy Job - Oce VarioPrint 2045-65 DC Job Manual

Prepare the copy job

Introduction
To prepare the copy job, you must first inspect your originals. If the originals
are different sizes and types, sort the set of originals into separate job parts.
Each job part requires a different setting profile. The combine key
you to create one assembled copy job from the separate job parts.
The Océ VarioPrint 2045-65 DC has two input locations for the originals, the
automatic document feeder and the platen.
Standard originals
A standard original represents:
A standard size (11 x 17'', 8.5 x 11'' or 5.5 x 8.5'')
A standard weight (30 -80 lb. bond)
Non-standard originals
A non-standard original represents:
A page of a book
A curled or damaged original
A non-standard size (not 11 x 17'', 8.5 x 11'' or 5.5 x 8.5'')
A non-standard weight (less than 30 lb. bond or more than 80 lb. bond)
Job parts
If the set of originals has more than one original type, make separate job parts.
Then, enter the settings for each job part.
Split the set of originals in separate job parts if the set of originals con-
tains:
One or more non-standard originals
More than 50 8.5 x 11'', 50 5.5 x 8.5'' or 35 11 x 17'' originals
28 Océ VarioPrint 2045-65 DC Job manual
allows