Show Snmp Group - Dell N1100-ON Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Per RFC 2573, an implicit exclude all filter is present at the beginning of
every filter list. This implicit filter is not shown in the output of this
command.
Example
The following examples display the configuration of filters with and without a
filter name specification.
console # show snmp filters
Name
------------------- ---------------------------------
user-filter1
user-filter1
user-filter2
console # show snmp filters user-filter1
Name
------------------- ---------------------------------
user-filter1
user-filter1

show snmp group

Use the show snmp group command to display the configuration of groups.
Syntax
show snmp group [groupname]
• groupname — Specifies the name of the group. (Range: 1-30)
OID Tree
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
1.3.6.1.2.1.2.2.1.*.1
OID Tree
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
Switch Management Commands
Type
Included
Excluded
Included
Type
Included
Excluded
2093