Show Authen Application; Config Authen Parameter - D-Link DGS-1100-06/ME Cli Reference Manual

Restrictions
Example usage:
To configure the default method list for the command line interface:
DGS-1100-06/ME:5#config authen application http login default
Command: config authen application http login default
Success.
DGS-1100-06/ME:5#

show authen application

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the login and enable method list for all applications on the Switch:
DGS-1100-06/ME:5#show authen application
Command: show authen application
Application Login Method List Enable Method List
--------------
Console
Telnet
HTTP
DGS-1100-06/ME:5#

config authen parameter

Purpose
Syntax
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
default method list.
method_list_name <string 15> – Configures an application for user
authentication using a previously configured method_list_name.
Only Administrator or operator-level users can issue this command.
To display authentication methods for the various applications on the
Switch.
show authen application
The show authen application command displays all of the
authentication method lists (login, enable administrator privileges)
for Switch configuration applications (console, Telnet, SSH) currently
configured on the Switch.
None.
None.
------------------------- ------------------
default
default
default
To provide user to configure the authentication parameters on the
Switch.
config authen parameter [attempt <int 1-255> |
response_timeout <int 0-255>]
default
default
default
222