Config Authen Parameter Attempt; Show Authen Parameter - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
5-25

config authen parameter attempt

Description
This command is used to configure the maximum attempts for user's trying to login or promote the
privilege on console, TELNET, SSH application.
Format
config authen parameter attempt <int 1-255>
Parameters
attempt - The amount of attempts for user's trying to login or promote the privilege on console or
TELNET or SSH. Default value is 3.
<int 1-255> - Enter the attempt amount here. This value must be between 1 and 255.
Restrictions
Only Administrators can issue this command.
Example
To configure the maximum attempts for user's trying to login or promote the privilege to be 9:
DWS-3160-24PC:admin# config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
DWS-3160-24PC:admin#
5-26

show authen parameter

Description
This command is used to display the parameters of authentication.
Format
show authen parameter
Parameters
None.
Restrictions
Only Administrators can issue this command.
83