Verifying A Vlt Configuration - Dell Force10 S4810P Configuration Manual

High-density, 1ru 48-port 10gbe switch
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

Verifying a VLT Configuration

To monitor the operation or verify the configuration of a VLT domain, enter any of the following
commands on the primary and secondary VLT switches:
Show Command Syntax
show vlt backup-link
Command Mode: EXEC
show vlt brief
Command Mode: EXEC
show vlt detail
Command Mode: EXEC
show vlt role
Command Mode: EXEC
show running-config vlt [ domain-id ]
Command Mode: EXEC
show vlt statistics
Command Mode: EXEC
show interfaces interface
Command Mode: EXEC
Figure 54-4. show vlt backup-link Command Output on VLT peer switches
FTOS#VLTpeer1#show vlt backup-link
VLT Backup Link
-----------------
Destination:
Peer HeartBeat status:
HeartBeat Timer Interval:
HeartBeat Timeout:
UDP Port:
HeartBeat Messages Sent:
HeartBeat Messages Received:
FTOS#VLTpeer2#show vlt backup-link
VLT Backup Link
-----------------
Description
Displays information on backup link operation (see
Displays general status information about VLT domains currently
configured on the switch (see
Displays detailed information about the VLT-domain configuration,
including local and peer port-channel IDs, local and peer VLT switch
status, and number of active VLANs on each port channel (see
Figure
54-6).
Displays the VLT peer status, role of the local VLT switch, VLT
system MAC address and system priority, and the MAC address and
priority of the locally-attached VLT device (see
Display the current configuration of all VLT domains
a specified group on the switch.
Valid domain-id values are 1 to 1000.
Displays statistics on VLT operation (see
Displays the current status of a port or port-channel interface used in
the VLT domain.
interface specifies one of the following interface types:
Fast Ethernet: Enter fastethernet slot/port.
1-Gigabit Ethernet: Enter gigabitethernet slot/port.
10-Gigabit Ethernet: Enter tengigabitethernet slot/port.
Port channel: Enter port-channel {1-128}.
10.11.200.18
Up
1
3
34998
1026
1025
Figure
Figure
54-5).
Figure
54-7).
(Figure
Figure
54-9).
Virtual Link Trunking (VLT) | 1089
show
54-4).
54-8) or

Advertisement

Table of Contents
loading

Table of Contents